Home » Amateur » Extras » QRM eliminator

QRM eliminator

QRM eliminator
QRM eliminator QRM eliminator
Product Code: QRM-E
Availability: 2
Price: $49.99
Qty:     - OR -   Add to Wish List
Add to Compare
  • EASY TO USE: X Phase QRM eliminator is easy to use and plugs into the antenna feedline from the receiver unit without any other modifications to the radio. 
  • BUILT IN PTT CONTROL: Aluminum alloy QRM eliminator has a built in PTT control that keeps the eliminator connected during transmission. 
  • WIDELY COMPATIBLE: Adjustable signal canceller contains the interface circuitry needed to work with most modern HF transceivers and is widely available. 
  • AUXILIARY ANTENNA: An additional auxiliary receiving antenna is required, such as a 2m/6.6ft antenna or a few meters of wire in a shed. These two antennas receive unwanted signals, resulting in different phases. 
  • ADJUSTABLE: QRM eliminator now allows phase angle and amplification to be adjusted to eliminate unwanted signals before they get to the front of the receiver.

​

1. WIDELY COMPATIBLE: Adjustable signal canceller contains the interface circuitry needed to work with most modern HF transceivers and is widely available.
2. EASY TO USE: X Phase QRM eliminator is easy to use and plugs into the antenna feedline from the receiver unit without any other modifications to the radio.
3. ADJUSTABLE: QRM eliminator now allows phase angle and amplification to be adjusted to eliminate unwanted signals before they get to the front of the receiver.
4. AUXILIARY ANTENNA: An additional auxiliary receiving antenna is required, such as a 2m/6.6ft antenna or a few meters of wire in a shed. These two antennas receive unwanted signals, resulting in different phases.
5. BUILT IN PTT CONTROL: Aluminum alloy QRM eliminator has a built in PTT control that keeps the eliminator connected during transmission.

Spec:
Item Type: QRM Eliminator
Material: Aluminum Alloy
Frequency Range: 1.8 MHz-30 MHz
Connection: Main Antenna, Auxiliary Antenna And 3xBNC
For: Jack For PTT
Required Voltage: 13.8V 150mA

How to Use:
See instructions for use

PackageList:
1 xQRM Eliminator

3 x Antenna Adapter
3 x Knob Accessory
1 x Antenna Cable
1 x Cable
1 x Power Cord
1 x Instruction Manual

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Continue
Powered By OpenCart
Peppers Radio Communication © 2024