Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!!

Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!!
Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!! Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!! Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!! Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!! Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!! Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!! Digital and Amp/Voltage Meter ( Two in one) - 100V 50A DC LED with 50 Amp shunt included!!
Product Code: DCAMP
Availability: 1
Price: $24.99
Qty:     - OR -   Add to Wish List
Add to Compare

Product Description

 
Features:
Operating voltage:DC 4.5 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :DC 50A (require external shunt - Included!)
Minimum resolution(A): 0.1A
Operating Current: <20mA
Display: three 0.28" LED digital tube
Display color: Red (dual display)
Dimensions: 48 x 29 x 21mm
Mounting cutout: 45.5 x 26.5mm
Refresh rate: about 500mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65°
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
 
Wiring:
Black line (thin): vacant or buck circuit (module) negative
Red line (thin): power supply+
Black line (thick): COM, common measuring
Red line (thick): PW+, measuring terminal voltage input positive
Yellow line (thick): IN+, current input+
(Please refer to the wiring diagrams for more details)
 
Notice:
The voltage between the thin red and thin black lines must be within DC 4.5-30V
The ammeter can only be connected to the negative of the device under test
Exceeds 5A, long-term full load working continuously, it is recommended that the measurement side of the leads are directly soldered to the socket
When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits
If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing
 
Package include:
1x Digital Volt Ampere Meter
1x 50 Amp Shunt
2x sets of wiring cables
 

Powered by Opencart

Peppers Radio Communication © 2018

 
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Peppers Radio Communication © 2018