JRC NRD525 - Full HF/SW Communication Tabletop Receiver

JRC NRD525 - Full HF/SW Communication Tabletop Receiver
Product Code: NRD-525
Availability: 1
Price: $450.00
Qty:     - OR -   Add to Wish List
Add to Compare


 

                                                 

                                             

 

                                       

                                                               

                                              

 

 

Japan Radio Corporation (J.R.C.) Communication Receiver (NOS) New in the Box..

 

 

NRD-525 | JRC

 

 

JRC » NRD-525 — Price & Specifications

 

Quadruple-conversion HF desktop receiver. Analogical configuration, frequency range 0.09-34 MHz all-mode with IF notch filter. Ideated in Japan, year of introduction 1986.

Reference market : ham-radio

 

General :
Frequency coverage 0.0900 ~ 34.0000 MHz
34.0000 ~ 60.0000 MHz [1]
114.0000 ~ 174.0000 MHz [1]
423.0000 ~ 456.0000 MHz [1]
Modulation mode CW / RTTY / LSB / USB / AM / FM
Tuning step 10 Hz
1 MHz
Receiver :
Sensitivity CW / SSB 5.0 uV (0.09~1.6 MHz, 10dB S/N)
0.5 uV (1.6~34 MHz, 10dB S/N)
1.0 uV (VHF~UHF, 10dB S/N) [1]
RTTY 5.0 uV (0.09~1.6 MHz, 10dB S/N)
0.5 uV (1.6~34 MHz, 10dB S/N)
1.0 uV (VHF~UHF, 10dB S/N) [1]
AM 15.0 uV (0.09~1.6 MHz, 10dB S/N)
2.0 uV (1.6~34 MHz, 10dB S/N)
3.0 uV (VHF~UHF, 10dB S/N) [1]
FM 0.7 uV (1.6~34 MHz, 20dB SINAD)
1.5 uV (VHF~UHF, 20dB SINAD) [1]
Selectivity SSB > 2.0 KHz (-6dB)
< 6.0 KHz (-60dB)
AM > 4.0 KHz (-6dB)
< 10 KHz (-60dB)
FM > 12 KHz (-6dB)
RF attenuator 20 dB
IF-filter ultimate attenuation [2] 65 dB
Dynamic range 100 dB
95 dB (50 KHz spaced signals) [2]
72 dB (5 KHz spaced signals) [2]
Blocking [1] 123 dB (100 KHz spaced signal)
Image rejection > 70dB
IF rejection > 70dB
AGC Fast, slow
Frequency stability ± 3ppm max
Intermediate frequency 70.453~70.454 MHz
455.0 KHz
Features :
Memory 200 regular memories
2 for programmed scan limits
Display 10 Hz frequency resolution
40-segments signal meter bar
Antenna SO239 50Ω connector
Terminal jack 600Ω (0.09~1.6 MHz)
Power supply 12 ~ 16 VDC external, 13.8V nominal
100~240 VAC
Power consumption 25 W
Audio power 0.5 W with a 4Ω load
Audio output Jack 6.35 mm headphone
Jack 3.5 mm line
Jack external speaker
Connections RS232C-9 PC
Jack timer
Jack mute
Plug VDC output
Mechanical and environmental data :
Dimensions 330 (W) x 130 (H) x 280 (D) mm
Weight 8.5kg

[1] With CMK-165 optional unit
[2] This parameter, not in official data, was obtained with direct tests

 

Description :

 

This receiver adopts a double frequency conversion configuration and covers the band of 0.09~34 MHz in all operating modes. The front-end uses a group of band pass filters as a preselector, tuned by diodes with variable capacitance according to the frequency from the microprocessor, followed by a mixer made by FET connected in push-pull configuration. This is to guarantee a dynamic range of adequate level. Among the features: PBS (pass-band-shift) to move the IF window of ±1 KHz, BFO to move the detection point within ±2 KHz, notch filter in the 2nd IF with minimum attenuation of 30 dB, noise-blanker (NB) with intervention level adjustment, AGC time constant selectable between slow or fast response, RF-gain for continuous gain adjustment in the medium frequency chain, squelch, RF attenuator, audio tone control, dual clock with timer, output connection to activate a recorder, mute connection for pairing to a transceiver.

 

The tuning setting can be performed by rotary control, with direct input from the keyboard, or even remote PC management. The display shows every data and active function including the S-meter which uses in-line segments for the indication on the graduated scale in S points. There are 200 memory locations to which also associate the AGC setting, the possible insertion of the RF attenuator, the IF filter to be used. Search options between memory channels and between frequency limits, both with settable speed.

 

In the apparatus there are two free positions for the installation of filters at the level of the 2nd IF. One is corresponding to the narrow position and is intended for filters with a bandwidth of 1 KHz, thus for RTTY / CW modes. One instead corresponds to the auxiliary position and when it does not mount any filter has a bandwidth of about 12 KHz, the same that is used in the FM mode, while as an option the user can insert a filter as desired among the compatible ones. The characteristics of the components are as shown in the following table.

 

 

 

 

 

Powered by Opencart

Peppers Radio Communication  2020

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Peppers Radio Communication © 2020