Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED**

Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED**
Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED** Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED** Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED** Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED** Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED** Kenwood R-2000 Shortwave AM CW SSB Radio Receiver **VHF UNIT INSTALLED**
Brand: Kenwood
Product Code: R2000
Availability: 1
Price: $550.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

Kenwood R-2000

The Kenwood R-2000 was the first modestly priced communications receiver to offer a host of advanced capabilities; succeeding the R-600 and R-1000. The R-2000 tunes from 100 to 29999.9 kHz in five modes (AM, FM, USB, LSB, and CW). The R-2000 presents the listener with three different tuning rates (and a frequency lock) plus convenient 1 MHz UP/DOWN buttons. A noise blanker, four position attenuator, AGC and all mode squelch are also included. The ten channel memory stores frequency and mode. The band-scan mode permits the R-2000 to scan between two user selected frequencies (at three rates!). The built-in seven digit fluorescent tube digital display indicates frequency to the nearest 100 Hz. With dimmer switch. The dual 24 hour quartz digital clock-timer can be used to activate the radio and an auxiliary device (recorder, etc.) for absentee DXing. The large front mounted speaker insures good fidelity. The rear panel has input for coaxial or hi-Z wire antennas. 120 VAC. UL listed. There is also the optional VC-10 VHF converter for additional frequency coverage.

 

 

Kenwood VC-10

The Kenwood VC-10 VHF Converter is made exclusively for the R-2000. Installation is simple. Remove the plate on the back panel of the R-2000 and carefully slide-in and connect the VC-10 to the jack near the antenna input. It provides its own attenuator switch and SO-239 antenna input. The R-2000 will now additionally tune 108-174 MHz in all modes. The full frequency will display on the R-2000. The VC-10 has its own RF Attenuator and SO-239

 

 

 

R2000 Specifications
Frequency Range......150 - 30000 kHz
Power................100/120/220/240 VAC 50/60 Hz
Antenna Impedance....50 or 500 ohm
Selectivity (-6dB)...AM	6.0 kHz, SSB/CW	2.4 kHz, FM	15.0 kHz
Sensitivity..........0.4 µV 2-30 MHz, SSB/CW (S+N/N=10dB)
Image Ratio..........>70 dB
IF Rejection.........>70 dB
Freq. Accuracy.......± 10 x10-6 or better.
Intermediate Freqs...1st IF = 45.85 MHz, 2nd IF = 9.85 MHz, 3rd IF = 455 kHz
Audio Output.........1.5 Watts at 8 Ohms.
Dimensions...........14.8"Wx 4.5"H x 8.3"D
Weight...............12.1 Lbs. (5.5 kg)

Kenwood R-2000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Kenwood R-2000

 

 

 

Powered by Opencart

Peppers Radio Communication  2020

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Peppers Radio Communication © 2020