Antenna Analyzer Portable on site for VHF/UHF

Antenna Analyzer Portable on site for VHF/UHF
Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF Antenna Analyzer Portable on site for VHF/UHF
Brand: Surecom
Product Code: SA250
Availability: 1
Price: $145.00
Qty:     - OR -   Add to Wish List
Add to Compare

SURECOM SA250 3 Band VHF/UHF Colour Graphic Antenna Analyzer
 

Introduction

SA-250 antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feed lines.
 Mainly, these are S.W.R. (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).
 Easy-to use measurement modes. make SURECOM attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna. 

Main Features:
 2.2 ” precision LCD screen,High-lumen LCD brightness, easy to read in direct sunlight
 Heavy duty Aluminum enclosure,strong anti-interference ability.
 Very compact and convenient for field use
 Built-in rechargeable Li-ion battery
 Full Band control (No need select Band )
 Easy setup, only four control buttons with convenient on-screen soft menus
 Constant Battery Status Indicator and Auto Shut-off
 Built-in timer shows elapsed time when unit is turned on
 High efficiency IC, low power consumption, the longest working hours
 More choice measurement frequency Span .
 One botton quick scan mode (V1,V2,U) or 3 band by full screen.
 Auto marker the Best s.w.r. level reference

 

Specifications:
Model No. SA-250


Frequency Range:

FULL VHF BAND: 132 to 173 Megahertz  & complete VHF: 200 to 260 Megahertz 

Complete U.H.F. Bandwith from : 400 to 519 Megahertz

 

 


Connector: SMA-Female  (50 OHM)
RF Output Power: 1-1.5V(5 - 10dB)
Frequency Step: 0.1/1/10/100/1000KHz
V.S.W.R. Range: 1.00-19.99
ZRX Range: 0-99.9
Build-in Rechargeable Battery : Lithium-Ion @ 3.7V 900mah 
Voltage input : DC5V> 500mA 
Frequency stability: <0.5PPM
Span width: 0.54MHz/1.35MHz/2.7MHz/5.4MHz/10.8MHz/27MHz/54MHz/108MHz/216MHz/432MHz
Charger indicator:  Two-color LED Hidden (when not charging) there are three instructions state:
 1, charging (red) ;
 2, charging is completed (green)
 3, Battery fault (flashing)
Charger Plug: Standard Micro USB connector
Size:  70 x 120 x 25 mm
Colour Display: TFT LCD 320 x 240 pixels
Weight:
172g

 

 Power Management
 Power Source: Built-in 3.7V, 900-mAh ,Size 14500 of Lithium battery.
 Charge Controller: Smart charger, LED charging-status indicator
 Voltage Monitor: On-screen DVM, plus battery condition icon
 Charger Source: Any USB port, analyzer accepts Micro-USB plug
 Power Savers: Auto-off timer, Auto Run/Stop RFgenerator controlInterface
 RF Connector: SMA-female , (optional PL-259 ,N connector need adapter)
 Battery Charge Connector: Micro-USB
 Screen: 2.2 inch high-output color TFT
 Function Keys : 4 botton, with on-screen (soft-menu) identifiers
 Tuning: Rotary encoder with press-in tuning-step selection
 Weight and Dimensions
 Case: Aluminum metal
 Size: 2.8" wide x 4.0" high x 1.0" deep (7 cm x12cm x 2.5 cm)
 Weight: 6.1 oz (0.172 kg)

 PACKAGE CONTAIN:
 1 x SURECOM SA-250 (ENGLISH VERSION) Color Graphic Antenna Analyzer

 


 


 


 


 


 


 

 

 

Product Description

SURECOM SA250 ( TRI-BAND) 132-173 / 200-260 / 400-519MHz Colour Graphic Antenna Analyzer

 

Description:

SURECOM-HK are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feed lines.
Mainly, these are S.W.R. (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).
Easy-to use measurement modes. make SURECOM attractive for professionals and hobbyists. It is quite important that graphical display
of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required
to adjust an antenna.

 

Main Features: 

  • 2.2 ” precision LCD screen,High-lumen LCD brightness, easy to read in direct sunlight
  • Heavy duty Aluminum enclosure,strong anti-interference ability.
  • Very compact and convenient for field use
  • Built-in rechargertable battery
  • Full Band control by knob ( 132-173Mhz / 200-260Mhz / 400-519MHz)
  • Easy setup, only four control buttons with convenient on-screen soft menus
  • Constant Battery Status Indicator and Auto Shut-off
  • Built-in timer shows elapsed time when unit is turned on
  • High efficiency IC, low power consumption, the longest working hours
  • More choice measurement frequency Span .
  • One botton quick scan mode (V1,V2,U) or 3 band by full screen.
  • Auto marker the low s.w.r. level reference

 

 

Specifications:
Model No. SA-250
Frequency Range: 132-173Mhz / 200-260Mhz / 400-519MHz
Connector: SMA-Female  (50 OHM)
RF Output Power: 1-1.5V(5 - 10dB)
Frequency Step: 0.1/1/10/100/1000KHz
V.S.W.R. Range: 1.00-19.99
ZRX Range: 0-99.9
Build-in Battery : 3.7V 900mah ,Li-ion 14500
Voltage input : DC5V> 500mA 
Frequency stability: <0.5PPM
Span width: 0.54MHz/1.35MHz/2.7MHz/5.4MHz/10.8MHz/27MHz/54MHz/108MHz/216MHz/432MHz
Charger indicator:  Two-color LED Hidden (when not charging) there are three instructions state: 
1, charging (red) ;
2, charging is completed (green) 
3, Battery fault (flashing)
Charger Plug: Standard Micro USB connector
Size:  70 x 120 x 25 mm
Colour Display: TFT LCD 320 x 240 pixels
Weight:

172g

 

Power Management
Power Source: Built-in 3.7V, 900-mAh ,Size 14500 of Lithium battery.
Charge Controller: Smart charger, LED charging-status indicator
Voltage Monitor: On-screen DVM, plus battery condition icon
Charger Source: Any USB port, analyzer accepts Micro-USB plug
Power Savers: Auto-off timer, Auto Run/Stop RFgenerator controlInterface
RF Connector: SMA-female , (optional PL-259 ,N connector need adapter)
Battery Charge Connector: Micro-USB
Screen: 2.2 inch high-output color TFT
Function Keys : 4 botton, with on-screen (soft-menu) identifiers
Tuning: Rotary encoder with press-in tuning-step selection
 
Weight and Dimensions
Case: Aluminum metal 
Size: 2.8" wide x 4.0" high x 1.0" deep (7 cm x12cm x 2.5 cm)
Weight: 6.1 oz (0.172 kg)

 

 

 

1.0 Turn on and Turn off the power
      Turn on the power, Press and hold White botton when the dot disappear from left up angle ,. top Menu  appeared on the screen.  
      Turn off the power, You have 2 method :
                                 a) On Top Menu page ,Press and hold the  White [F1 ] botton  5 second .
                                 b) On Top Menu page , Rotary encoder on "Power off", Press the [F2 Enter] 

 

1.1Function Select (Please see Pic.1)
      You can turn the knob select you want function and press [F2.Enter] botton . 

 

2.0 ANTENNA TEST EXAMPLES (Scan mode): (Please see Pic.2)
     In the Top Menu  screen: Rotary encoder on "Scan", Press the [F2 Scan] to frequency mode measurement button, enter Scan­ (scan mode) screen.
     Press [F.2  scan ],button to start the scan operation. During scanning, in order to ensure measurement accuracy, each frequency will stay for short while.
     one scanning cycle  will take about 1-2 seconds. Once SCAN is done, it will  enter ”Present” mode (result) screen 
     You have  results on the screen :  Show the SWR curve only (because default setting SWR curve only , Zx curve, Rs curve, jx curve Disable)
     You can Enable other curve on the screen:  On Top Menu page, Rotary encoder on "Zx", Press the [F2 Enter] to enable .   (Please see Pic.1)
     Other cure will Disable when Power Off , If want enable in the future, Rotary encoder on "Save", Press the [F2 Enter] to save setting .(Please see Pic.1)

2.1 Move the curso marker: (Please see Pic.3)

     View the scan frequency point on the curve on each scan of the specific parameters of the measurement results.
     Press the  [F3.View ] button to start the view operation mode. rotary encoder ,the white triangle curve marker  is move
     Dot scale will display on screen, Press bottom change the Dot  scale,You have 3 options of Dot scale mode for choose, [Dot =x1][Dot =x10][Dot= x25] . 
     SWR Full scale will display on screen,Press bottom change the graphically plot SWR,You have 3 options scale  mode for choose, [SWR=x2 ][SWR= x 0.5][SWR=x1] .

2.2 Quick 1 start Scan mode: (Please see Pic.4)

    Quick view the scan frequency point on the curve on each scan 
     Press the button [Quick       1  ]  to start the Quick 1 operation mode .You have 3 options scan mode for choose .
     Press the button [F1 Scan V1  ] . 132 to 174 MHZ can of the specific parameters of the measurement results.
     Press the button [F1 Scan V2  ].  200 to 260 MHZ can of the specific parameters of the measurement results.
     Press the button  [F1 Scan  U  ] . 400 to 519 MHZ can of the specific parameters of the measurement results.

2.3  Quick 2 start Scan mode:  (Please see Pic.5)

     Quick view the Full band scan frequency point on the curve on each scan
     Press the  [Q2  ] button to start the Quick 2 operation scan mode.
     Press the  [ScanFull ] button to start the 3 BAND (132-174,200-260,400-519MHz )Scan operation mode. the measurement results. after you have 2 options
     mode for choose .
     Press the  [Scan2 Mk ] button to read the best SWR Yellow triangle curve marker .( operation Span 108MHz)
     Press the  [MoveCur  ] button ,Nearby the best SWR Yellow triangle curve marker,  Move right hand side  .Press again move left hand side.

3.0 ANTENNA TEST EXAMPLES (Single mode): (Please see Pic.7)

In the Top Menu  screen: Rotary encoder on "Single", Press botton "F2" single ­frequency mode measurement button, enter single­ (single scan mode) screen.
a, Rotary encoder potentiometer enter the center frequency, the specific reference to the above operation "SCAN" sweep measurement mode descriptions.
b, Press the ”F2 scan", to start the scan for one time  .
Single ­frequency mode provides a single frequency impedance measurement, the measured frequency of the basic parameters are displayed on the screen. And
to indicate the form of bars and numbers displayed on the screen quickly.
The scanning one time , will stop, until you press the F2 Scan  button or  rotary encoder potentiometer enter the center frequency.
In this mode, it can be used as an accurate signal generator, please refer to RF out.

 

 

SA250_A

SA250_B

 

 

 

PACKAGE CONTAIN:

1 x SURECOM SA250  (ENGLISH VERSION) Colour Graphic  Antenna Analyzer 
1 x English User"s Manual
1 x Mirco Usb Charger Cable
1 x AC Adapter 100-240V (Depends on your country)

 

 


 

SA250_5

SA250_6

SA250_7

SA250_8

 

 

Peppers Radio is powered by Opencart™

Peppers Radio Communication 2024 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
Peppers Radio Communication © 2024